UrS4 issues

[Fred Munro]

Iain;

Sounds like you are talking about the X-plug on the hydraulic pump. You can
buy a new plug and o-ring from the dealer - it's quite cheap. You may need a
modified drag link socket and a hand-held impact screwdriver to get the old
plug out. This is a common problem - I replaced mine last year and it sealed
up OK.

The back left corner is a common area for a valve cover gasket leak. Are you
sure it's the head gasket? The valve cover gasket is easily replaced - I've
done two on my car in the 150,000 km I've put on it.

HTH

Fred Munro
'94 S4


-----Original Message-----
From: quattro-bounces at audifans.com
[mailto:quattro-bounces at audifans.com]On Behalf Of
iain.atkinson at tesco.net
Sent: January 30, 2005 5:34 AM
To: quattro at audifans.com
Subject: UrS4 issues


Hi folks

just would like some opinion on 2 outstanding items on the to do list.

1. I have a minor leak out of the pas pump from one of these big cross
headed screws, can you get the seals for these???

2. minor oil weep from what i think is the headgasket right at the back of
the engine on the left hand corner as you look at it. major issue or not????


thanks


Iain

_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro