4000Q Fuel Q: FPR or fuel distributor PLUNGER

[SuffolkD at aol.com]

I tried that already, but I'll do it again as the carb can didn't have the 
straw at the tip for exact forceful placement.

Where is the plunger in the fuel distributor?

I had this exact part (FPR) fail in my 87 4000Q years ago.  I was able to 
tell it was bad as an Ohm meter across the two terminals showned infinity or open 
contact.  Spec is somewhere around 470 Ohms (guess) or some fixed figure.
I suspect dirt is upstream of the system as I already did the fuel filter.
-Scott by BOSTON


>>>I had to do this twice in addition to pulling the plunger out of the fuel 
distributor. <<<