No boost to 1.6 bar in one EZ step (2)

[SuffolkD at aol.com]

Without pressurizing the IC area I don't know.
I suspect the ECU and PT (pressure transducer) mod to the ECU (Minhea chip) 
may have something to do with it.

There has been talk about a modified ECU would read 1.6 or so on the dash but 
be actually higher in reality.

Mike Sylvester fixed my vacuum lines around the back of the IM where the 
three vacuum barb fittings go last year and I had 1.6 for a day or so until I 
suspect, the increased vacuum failed the last of the really frayed hoses.....

HTH - Scott by BOSTON

In a message dated 7/21/2005 9:03:40 AM Eastern Daylight Time, 
Eric_R_Kissell at whirlpool.com writes:

> So you are now up to 1.6.
> Congratulations.
> Almost to the 1.8 you should have.
> Any idea where your missing 0.2 is going?
> Good luck,
>