sagging liner

[Mikea2769 at aol.com]

If you don't want to go for the full replacement:
A length of thin wood (or plastic) molding or trim from lumber yard, 1/2 to  
1 inch wide can be used. Run it from one side to the other and tuck each  end 
behind the trim in the vehicle-the trick is to cut it long  enough so that it 
"bows" upward and holds the material against the roof.  You can buy a spray 
headliner adhesive for the edges.
 
 
Mike  Aiello
87 5kcstq, 313k miles, orig.  owner