Antilock Off

[Kneale Brownson]

The sensors just butt up against a collar in their retainer spot, so you
can't push them in "too far" as in the older cars, where they used a
sacrificial cap to place the sensor properly.  Be sure to clean out the
retainer hole too so corrosion doesn't hold the sensor away from maximum
penetration.

At 01:49 PM 6/15/2005 -0400, Kent McLean wrote:
>KWSTURTZ wrote:
>> Simplest thing to do would be to clean the sensor
>> 
>>> rings/wheels, and reset the sensors at the wheels,
>>> and pray that fixes it.  Otherwise a sensor may be
>>> bad, or the ABS unit is toast.
>>>
>> How to reset Sensor's ?
>
>Pull them out, clean them, and set them back into
>their holders ("re-setting" them).
>
>Oh, and it may be a broken wire somewhere in there, too.
>
>--
>Kent
>_______________________________________________
>quattro mailing list
>quattro at audifans.com
>http://www.audifans.com/mailman/listinfo/quattro