[Fwd: Re: quattro Teardown]

[Keith Sturtz]

-------- Original Message --------
Subject: 	Re: quattro Teardown
Date: 	Wed, 02 Mar 2005 14:40:47 -0800
From: 	Keith Sturtz <syfer at mindspring.com>
To: 	MWoodland at Dentsply.com
References: 	<OFFB9CE74F.C83D1401-ON85256FB8.004A67BE at dentsply.com>



Looking for source of instruction or advice want to tear down remove 
head on 1990 Quatro 200 as i have problem Exhaust into cooling drives 
for awhile then blows all the water out  radiator overflow and high 
pressure top of engine so either bad head or head gasket just had head 
repaaced 6 m ago so ? Mainly need advise steps to pull head bigist 
problem is turbo exaust parts i think.

MWoodland at Dentsply.com wrote:

>Just trying to verify that the list is still up.
>Obligatory Quattro content: Still hammering Max to work.
>Odo seized at 280k, for the time being.. like being in suspended animation.
>Mark
>
>-----------------------------------------------------------
>
>This message contains confidential information intended
>only for the use of the addressee(s) named above and may
>contain information that is legally privileged.
> If you are not the addressee, or the person responsible
>for delivering it to the addressee, you are hereby notified
>that reading, disseminating, distributing or copying this
>message is strictly prohibited.  If you have received this
>message by mistake, please immediately notify us by
>replying to the message and delete the original message
>immediately thereafter.  
>Thank you.
>
>Any views expressed in this message are those of the
>individual sender, except where the sender specifies and
>with authority, states them to be the views of DENTSPLY
>INTERNATIONAL INC.
>
>
>_______________________________________________
>quattro mailing list
>quattro at audifans.com
>http://www.audifans.com/mailman/listinfo/quattro
>
>
>  
>