High Pressure Power Steering Hose

[David Torrey]

Mike -
 
The difficult part of this job is removing and connecting the end of the hose attached to the steering rack.  With a long  open end wrench it is possible to remove the bolt without removing the rack.  Very small 1/8 turns.  I may have a write-up at home, it's been at least three years since I replaced mine on a '93 100CSQW.  Inserting the banjo bolt with new crush washer was no joke.  Can be done with patience and a little grease to hold the washer and bolt together.
 
Best regards
David Torrey
 
'79 BMW 320i
'93 100CSQW
2001 Saab 9-5 Wagon
'91 Saab 900
 
 
 

		
---------------------------------
Celebrate Yahoo!'s 10th Birthday! 
 Yahoo! Netrospective: 100 Moments of the Web