ABS PROBLEMS Audi 200 TQ
Keith Sturtz
syfer at mindspring.com
Fri Mar 11 22:09:40 EST 2005
I checked and cleaned the front sensors ( are there back ?) and how can
i "jumper" ? i cant tell for shure ( most of the feel is in pedal) but i
think it is one of the fronts that lock BTW 1990 200 TQ
Tony Hoffman wrote:
> Keith,
>
> Something to do with one of the sensors. You need an o-scope to
> diagnose this, but you can jumper them together to figure it out also.
> The wheel(s) that lock(s) up at first is(are) not the bad one(s). The
> one that doesn't lock up is the problem child. I went through this on
> a 5000 TQ, only to find the broken sensor had been stuck to the side
> of the strut housing.
>
> Tony Hoffman
>
>
> Keith Sturtz <syfer at mindspring.com> wrote:
>
> MY ABS system when start up car pull out and hit brakes you get a
> Spring
> effect (brakes lock thing pop loose sprung feeling at brake pedel)ABS
> system shuts off and stays off if you dont hit braks soon after start
> no ABS system will just shut off after a few if you turn on abs
> system
> at switch and hit brakes right away you will get the same spring
> effect
> and by the way the car will not come to a stop very fast so if i pull
> out right after i start car and have to slam on brakes to try to
> avoid a
> acadent im outa luck.
> I have replaced all brakes , Cleand the abs sensors, and replaced the
> ABS relay .
>
> ------------------------------------------------------------------------
> Do you Yahoo!?
> Yahoo! Mail - Easier than ever with enhanced search. Learn more.
> <http://us.rd.yahoo.com/evt=29916/*http://info.mail.yahoo.com/mail_250>
More information about the quattro
mailing list