AUDI START Problem NEED HELP ? ADVISE

[Keith Sturtz]

I am fairly sure timing on cam is correct i lined up all marks .. cam  
TDC and rotor and when it does start it runs well as long as no load is 
applied (i.e. in driveway) I timed it with a timing light and the 
flywheel mark. It ran good when i got it started until i jumped on it to 
execrate into traffic.


Eric_R_Kissell at whirlpool.com wrote:

>Have you confirmed that your cam timing is in proper synch with you crank
>rotation?
>
>I had a timing belt jump some teeth on the cam pulley once and the car
>would run but not very well.
>
>When you say "I timed it in the driveway" what do you mean?
>
>The computer controls the ignition timing.  You just need to make sure that
>the spark plugs are connected to the distributor in the right order and
>location on the distributor cap and that the cam and crank are connected in
>the correct relative positions by the timing belt.
>
>Eric
>
>
>
>  
>