Oxygen Sensor for 5KTQ
Ed Kellock
ekellock at gmail.com
Fri May 6 13:50:37 EDT 2005
13913 is the Bosch# for the 3-wire.
15716 is the Bosch# for the 4-wire.
Just ask for them by the Bosch# even if they ask what type of car,
just give them the Bosch#. They can and will find it by the Bosch#.
Removes much room for error.
Ed
On 5/6/05, Eric_R_Kissell at whirlpool.com <Eric_R_Kissell at whirlpool.com> wrote:
>
> I usually buy one specified for a mid/late 80's or early 90's Mustang which
> has been cheaper than the Taurus one. I have the mating connector from the
> Ford harness wired into my Audis, so it is plug and play for me. I believe
> the biggest difference between the various Ford/Mercury O2 sensor
> applications for this time period (e.g. Mustang, Taurus, Thunderbird, etc.)
> is the length of the wiring attached to the sensor.
>
> I usually go to Autozone and play a game with the guy behind the counter
> looking at O2 sensors for various 80's/90's Ford cars on his computer until
> I find the cheapest.
>
> HTH,
> Eric Kissell
> Tiffin, OH 44883
> 1991 200q 20v Avant, Koni Sports (yellow), 2.4 Bar (MRC), eBay Surprise
> 1989 200q 10v Avant, Boge Turbogas, 1.8 Bar (qlcc) - FOR SALE
> 1986 5000cstq Sedan, Bilsteins, 1.8 Bar (SJM)
>
>
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>
More information about the quattro
mailing list