type 44 hood vents...need a source

[Mark J. Besso]

Jesper,

It really depends on how 'exact' the vents have to be to the ones used on 
the Sport Quattro.  If you're looking for a cheap copy they're probably 
available at any Camaro restoration-parts place.  Check out the fender vents 
from a 1978-79 Z28.

Here's a couple of links to pictures:
- http://home1.gte.net/res6jtem/id6.html
- http://www.indycamaro.com/CICC/classified_pictures/Z22.JPG

Here's a couple of parts suppliers:
- http://www.jimmysbowtie.com/parts.htm
- http://www.early-birds.com/parts_1.html

I have no affiliation with any of these links, but it might prove to be an 
inexpensive solution.

~Mark


----- Original Message ----- 
From: "jesper moreau"
Subject: type 44 hood vents...need a source


> It is time to sweep away the heat from the heat soaked areas under the
> hood on my 88 5ktq. I have browsed the archives extensivly as well as
> googled a ton and haven't come up with much thus far.... I am looking
> for something close to the diag slant design on the URQ sport hood. If
> not that I'll settle for something similar to Jim's 90. Anyone have a
> suggestion as to where to source these vents from?
> Thanks in advance!
> --
> Jesper Moreau
> '88 5KTQ rocket
> '86 5KTQ stocket