A/C compressor-to-conderser hose seal????

Brandon Rogers brogers at terrix.com
Tue Sep 6 11:57:25 EDT 2005


I just rebuilt the a/c system on my urquattro- and some connections did not 
have o-rings - now I don't know if it's because they were never there of 
maybe I lost them a while back when I had undone some connections for the 
motor swap.  Bottom line - I bought at a FLAPS a universal a/c seal kit for 
$3.  Now every connection in my system has a new seal.  I say put the seal 
in.

Brandon
'98 A4
'84 urquattro 20V


----- Original Message ----- 
From: "Kneale Brownson" <kneale at coslink.net>
To: <200q20v at audifans.com>
Cc: <v8 at audifans.com>; <quattro at audifans.com>
Sent: Saturday, September 03, 2005 2:45 PM
Subject: A/C compressor-to-conderser hose seal????


> Is there supposed to be an O-ring where the hose from the A/C compressor 
> to
> the condenser attaches to the compressor?  I've had that hose bagged up
> while I've been replacing the compressor and I went to attach that hose 
> and
> don't see a seal in the bag or anywhere else nearby (like if fell off an
> rolled somewhere).   The fitting on the hose has a shoulder that a nut
> presses against a fitting on the compressor.
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v 



More information about the quattro mailing list