84 4KQ power steering hose

[Kneale Brownson]

That's a low pressure hose.  You can make a new one with an appropriate
length of new hose and a couple hose clamps by cutting the old hose off the
banjo fitting.

At 02:51 PM 9/28/2005 -0400, Kent McLean wrote:
>RICHARD KROL wrote:
>> Is there a good source for a supply power steering hose, this is the one 
>> that goes from the bottom of the reservoir to the top of the pump.
>
>You should be able to find a local hydraulics place (think
>semi-trailer truck repair, John Deere, Caterpillar) that can
>take your old hose, pull the metal fittings off of it, and
>put the fittings on to the new hose. I've seen people quote
>$40-50 for the PS hoses on the Type 44.