[urq] Thanks dennis - ( heights for stock urq springs)

[DGraber460 at aol.com]

In a message dated 12/4/2006 10:46:18 P.M. Mountain Standard Time,  
DGraber460 at aol.com writes:

Sorry  for the delay in getting these spring dimensions back to you.
I have stock  URQ springs loose, and a pair of front H&R's off the  struts as 
 
well, so I included these dimensions also. The H&R part number  (on  the 
spring) is 810-22-100VA.

SPRING Height Coil Dia. Wire Dia.       Stock Front  14.0000 5.6875 
0.5470  (Metric) 355.60 144.46 13.89     Stock Rear 12.5000 5.6875 0.5210  
(Metric) 317.50 144.46  13.23       H&R Front 12.3125 6.0000 0.5720   
(Metric) 
312.74 152.40 14.53

Hope this helps.  



I originally inserted a spreadsheet and it didn't come through  properly. 
So...........
 
Stock front = 14" (355 mm) tall, 5.69" (144 mm) coil dia., & .547  (13.89 mm) 
wire Dia
 
Stock rear= 12.5" (317.5 mm) tall, 5.69" (144 mm) coil dia., & .521"  (13.23 
mm ) wire dia.
 
H&R front= 12.313" (313 mm) tall, 6" (152.4 mm) coil dia., &  .572" (14.5 mm) 
wire dia. 
 
Hope this comes through readable.
 
Dennis
Denver