project 4ktq Idle screw issues and vacuum leaks..
DGraber460 at aol.com
DGraber460 at aol.com
Thu Feb 16 22:28:28 EST 2006
In a message dated 2/16/2006 8:10:27 P.M. Mountain Standard Time,
stpndsmn at yahoo.com writes:
I decided to pull the TB apart and see what was going on with the idle screw
and I discovered that the manifold side outlet had been blocked with
silicone which would render the Idle screw inoperable... So now with that fixed I
am going to track down the vacuum leaks that are in the weld at the tb flange
plate and see if that doesn't help things a bit.... I have my fingers
crossed
Matt
Project 4ktq with no end in sight
---------------------------------
Yahoo! Mail
Use Photomail to share photos without annoying attachments.
_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro
That silicone is hopefully old enough to have offgassed all its gasses.
Otherwise it will screw up your 02 sensor big time, and no matter what you fix it
won't run right.
I recently fought that beast.
Dennis
Denver
More information about the quattro
mailing list