89 200QTA rear rotor question

[Steve Sears]

Jason,
I have a set of Zimmerman rotors on the back of my 5ktq with the vented 
200q20v/urS6 rear brakes - you might try contacting Kristian at VM Autohaus 
(www.vmautohaus.com) and see if he can get them for you.  They're in BC, so 
no cross-border shenanigans.  Verify first that the rotors will fit on your 
car - the vented rear rotors had different calipers than the solid rotor 
ones - the vented rears were available first as a part of the "towing 
package".
Cheers!
Steve Sears
1987 Audi 5kTQ
1980 Audi 5k
1962 and '64 Auto Union DKW Junior deLuxes
----- Original Message ----- 
From: "tmb" <the_questionist at yahoo.com>
> To: "audifans" <quattro at audifans.com>
> Sent: Tuesday, February 21, 2006 10:32 AM
> Subject: 89 200QTA rear rotor question
>
>
>>
>> hey again.  i've got a few spare minutes today,
>> so i'll be inundating the list with a load of
>> questions...
>>
>> my 89 200QTA needs some rear brakes.  according
>> to ETKA, the 20V and wagon variations need
>> 269x20mm rotors vs the 245x10mm rotors used by
>> the MC sedan.  bigger brakes are always better,
>> but not if the only source is the dealership.
>>
>> are there any aftermarket suppliers for this size
>> rotor, or are there any options for me?  keep in
>> mind that any US aftermarket companies will
>> probably not do me much good, as the savings that
>> i'll see will quickly be eaten up by
>> shipping/border charges.
>>
>> thanks in advance!
>>
>> jason
>> tmb