update on project 4ktq
Huw Powell
audi at humanspeakers.com
Thu Feb 23 20:37:27 EST 2006
> I am going to start trying to make some brackets and start actually
> measuring things. I haven't had a lot of time lately to work on the
> car because I am also in school right now and that needs to be more
> important.
>
> I am wondering what kind of an output signal the closed throttle
> switch puts out. If the signal from the closed throttle switch is
> the same as the mitsu switch I will try to use that because it is
> already there and then I'll only have to make a bracket for the wot
> switch.
It is a simple switch, that is "open" whenever the throttle is off idle,
and is "closed" when you take your foot off the gas pedal.
> I had to plug off the line to the vacuum advance because it was
> leaking and I couldn't get it to stop even with a clamp. I think the
> hose is just half a size too big so I'll have to fix that also...
> I did conquer all the other vacuum leaks though, which is a good
> thing..
Yes, it is. Could the vac advance can itself have been the leak? You
can get a new one for about $30, as I recall. Or if your hose is old
and tired, the end may be flared a bit and hardened. Could try cutting
a bit off.
> Well, anyway that is all I know for now.
Cool, keep us updated...
--
Huw Powell
http://www.humanspeakers.com/audi
http://www.humanthoughts.org/
More information about the quattro
mailing list