Replacing AC system Orings
Peter Golledge
petergolledge at gmail.com
Fri Jul 7 00:51:36 EDT 2006
Dave,
I used an R134A "kit" from NAPA which indicated it was for Audi 200 and
about ten other different cars. It had some 50 odd O-rings and a couple of
R134a ports to go over the R12 ports. For ~ $25 it has enough O-rings to do
2x R134a conversions.
-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com] On
Behalf Of Dave C
Sent: Thursday, July 06, 2006 12:22 PM
To: pcschulz at comcast.net
Cc: quattro at audifans.com; 200q20v at audifans.com
Subject: Replacing AC system Orings
Back in June, Peter Schultz wrote ...
"I'm about to get the R134 conversion charge to last longer than a year -
will replace the accumulator and the orifice tube, and while I am at it, the
orings... Question is the orings speced in Bentley measure all measure a
width/thickness of 1.8 mm and an ID of 17.2, 14.0, 10.8, 9.3 mms... Where
can I find them? "
Hey,
With apologies for the slow response ...
I believe all these O-rings are actually standard fractional inch sizes
which Audi nicely converted to metric, ending up with these odd sizes.
Dave C.
_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro
---
Watch this space for ads :)
More information about the quattro
mailing list