V6 12v oil leak question

[Ingo Rautenberg]

Thanks, Dave!  Yours is the second answer that points to the valley pan
gasket.  So I need to order the intake gaskets as well (also for the one
that joins the two haves?) I'm guessing?

Ingo

----- Original Message ----- 
From: "David Kase" <davekase at pdqlocks.com>
To: "Ingo Rautenberg" <i.rautenberg at waratap.com>
Cc: <quattro at audifans.com>
Sent: Wednesday, July 12, 2006 12:19 PM
Subject: Re: V6 12v oil leak question


> Valley pan gasket is the likely culprit.
>
> Dave K.
>
> Ingo Rautenberg wrote:
>
> >Thanks to everyone regarding my AC question.  The first AC shop I
> >took the car to said it was R12 and no 134A and they only work
> >through the low side and that obviously it had been retrofitted with
> >a newer Condensor.  Yeah, right!  I'm taking it to a local tech for a
> >purge and fill.
> >
> >Where are likely areas where oil leaks on these aside from VC gaskets
> >and Headgaskets?  Any hoses I should look out for?  There appears to
> >be oil underneath the intake manifold, but I'd like some ideas before
> >removing the IM.  Patient is a '93 90s
> >
> >TIA
> >
> >Ingo
> >_______________________________________________
> >quattro mailing list
> >quattro at audifans.com
> >http://www.audifans.com/mailman/listinfo/quattro
> >---
> >Watch this space for ads :)
> >
> >
>
> -- 
> David B. Kase
> Engineering Manager
> PDQ Industries, Inc.
> 2754 Creek Hill Road
> PO Box 507
> Leola, PA 17540
>
> 717-656-4281 (p)
> 717-656-8749 (f)
>
>