Bad fuel pump or pressure regulator shims

[Ameer Antar]

I'd probably need a bunch of them. Can you tell me the dimensions of the shims?
 
-Ameer
 
-------------------- Original Message --------------------
From:Ado Sigal [a.sigal at bluewin.ch]
To:Ameer Antar [antar at comcast.net]
Cc:Quattro List [quattro at audifans.com]
Date:7/31/06 5:26:58 PM
Subject:Re: Bad fuel pump or pressure regulator shims
Shim kit is expensive, so could take pressure reg spring and shim
(always one, around ! mm thick) from any CIS car, or if you stuck, could
send you one (complete unit without the plunger), just send me your
address. I am in Geneva, so it might take few days.

Regards,

Ado

Ameer Antar wrote:

>The only other thing I could think of is pressure regulator in the fuel distributor needs to be shimmed. I actually took it out and cleaned the regulator. It was very clean, and I noticed there are no shims. This is supposed to be a rebuilt fuel distributor, so I'm a little surprised the pressure would be off. Does anyone know where to get these pressure regulator shims?
>Any advice is much appreciated.
>
>-Ameer
>
>------------------------------------------------------------------------
>
>_______________________________________________
>quattro mailing list
>quattro at audifans.com
>(http://www.audifans.com/mailman/listinfo/quattro) http://www.audifans.com/mailman/listinfo/quattro
>---
>Watch this space for ads :)
>