1990 200 quattro

[John S. Lagnese]

I have and use the HF unit. It has been used at least 10 times.
John
----- Original Message ----- 
From: "Kent McLean" <kentmclean at mindspring.com>
To: <quattro at audifans.com>
Cc: "PETER CATALANO" <kruzio2003 at yahoo.com>
Sent: Monday, March 06, 2006 8:52 AM
Subject: Re: 1990 200 quattro


> PETER CATALANO wrote:
>>   what is the tool for the wheel bearings?
> 
> Some people recommend the Hub Shark. Others have had good
> luck with Harbor Freight's "Fwd Front Wheel Bearing Adaptors", 
> part number 45210-4VGA. Still others remove the hub/strut 
> assembly and have a local machine shop press out/in the 
> bearings.
> 
> -- 
> Kent McLean
> '94 100 S Avant, "Moody"
> '89 200 TQ, "Bad Puppy" up in smoke
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
> ---
> Watch this space for ads :)
>