96 A6 Front Bumper Removal

[David Giannandrea]

As I recall, you will have to get under the bumper, look up toward the
location where the bumper shock tubes end. There will be a small notch in
the lower trailing edge of the bumper to allow tool access. Only 2 bolts.
You will need something like an 8mm hex driver (not exactly sure of size,
bigger than a pencil, smaller than a fountain pen) to reach up about 6" into
this area. I have long hex drivers, short drivers on an extension may work
too (if the joined driver+extension will pass through the opening)

David Giannandrea
1993 S4 (waiting for it's engine to come back)