quattro Digest, Vol 31, Issue 1

[Jeff Redig]

Sorry about this too cody.  I never got around to checking up on etka.  You
need either an MC1 TO bearing, or an mc2/3b shift fork.  I'm using the MC1
fork and TO bearing with good results.  I didn't/don't recall that you were
going with the 3b PP.

When you say you need an 016 shift fork, you already have one.  You need an
016 Torsen shift fork.

hth
Jeff




------------------------------
>
> Message: 2
> Date: Sun, 30 Apr 2006 18:00:59 -0600
> From: "Jim Green" <jim.green at gmail.com>
> Subject: Re: 3B flywheel conversion problems...
> To: "Cody Forbes" <cody at 5000tq.com>
> Cc: quattro at audifans.com
> Message-ID:
>         <3b3a72540604301700o39cee048v7ed9116ef83109e9 at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> On 4/28/06, Cody Forbes <cody at 5000tq.com> wrote:
> >
> > Well I went to put the engine in today, got it out my front door and
> down
> > the steps (interesting to say the least as I was by myself). So far I've
> hit
> > two problems. First off KEP sent the wrong disc. The box was correct,
> but
> > it's contents were wrong. I have the correct one comming overnight
> saturday
> > delivery. I decided to keep going anyway to make sure everything went
> smooth
> > tomorrow, and I'm glad I did. The 3b TO bearing I bought does not fit
> the
> > 5ktq fork. The way it latches on isn't even close, and I see no way of
> > adapting it to fit. Worse yet is the old 5ktq bearing BARELY mates to
> the
> > springs on the 3B pressure plate. If I can't figure something out I'm
> going
> > to try the 5k bearing and hope for the best I guess.
> >
> >
> > Jim/Jeff, any ideas whats going on? I'm thinking I need a 016 TO fork
> for
> > the 3B bearing?
> >
> > I weighed all of the new components BTW, I'll post more on this later,
> but
> > suffice it to say that 10lbs is now missing from the driveline.
> >
> > -Cody Forbes
> >
> > Damn, sorry about this!  Yea, you'll need the fork from an MC2 or 3B
> car,
> anyone out there have one for him?
>
>
> --
> Jim Green
> '89 90 GT35R quattro
> '89 80q
> http://www.mswanson.com/~jgreen/car_home.html
>
>
>