94 100 SQ Headlight Switch High Beam Problem

[Max Hoepli]

If it is the  same as in type 44 I have fixed such an assembly.
Took off steering wheel, the combination assembly and used M2.5 x 3 cm or
[4-40 x 1" inch] long screws to hold assembly together after having drilled
out the stud(s) whose solder hold on one side broke off. After some over
long screw(s) would have to be sawed off.

It worked in my case.


Max



----- Original Message ----- 
From: "David Toppin" <dave at pelletizer.com>
To: <quattro at audifans.com>
Sent: 17, May 2006 12:43
Subject: 94 100 SQ Headlight Switch High Beam Problem


> Hi List,
>
> When I push the switch to turn the high beams on, the headlights go
> completely out, they still work if I pull the switch back for the
momentary
> function.  Am I looking at a bad switch and do I have to replace it or can
> it be repaired?
>
> Thanks
>
> David Toppin
> dave at pelletizer.com
> www.pelletizer.com <http://www.pelletizer.com/>   <see our complete,
> searchable inventory
>
> The Pelletizer Group, Inc.
> 4 LaChance Street
> Gardner, MA 01440-2476
>
> (978) 669-0060
> (978) 669-0061 fax
>
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
> ---
> Watch this space for ads :)