how wide are Audi Fuchs alloys? and what is Porsche bolt pattern?

[Mark J. Besso]

The Porsche Fuchs wheels were available in 14" diameter on the early 911T
and 914/6 models.  Their widths ran from 5" on the previously mentioned
models to 12" wide on the rear of a 911 RSR in a 15" diameter. (Good luck
trying to find them!)

Audi also had a Fuchs wheel in metric diameters.  See this picture as proof.
(Notice the much deeper offset too)

Go to: http://5000tq.com/audifanspics/Ingolstadt/DSCN2957

I can't recall if they're 365mm or 390mm in diameter, but I believe they're
8" in width.  Someone with the Euro FA will have to verify that.

~Mark


-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com] On
Behalf Of Louis-Alain Richard
Sent: Tuesday, October 10, 2006 7:07 AM
To: 'Taka Mizutani'; JordanVw at aol.com
Cc: quattro at audifans.com
Subject: RE : how wide are Audi Fuchs alloys? and what is Porsche bolt
pattern?

There was also a Sport Quattro Fuchs 15x7 "winter wheel" that was ET20
instead of the usual ET45. This wheel replaced the 15x9 ET12 Ronal that
are stock SQ wheels.

This is completely futile info because these wheels are made of
unobtainium, a very rare metal found only in our dreams...

Louis-Alain


>
> Audi fuchs optional wheel for the 5ktq is 15x7", 5x112.
>
> Porsche fuchs are 5x130, but the widths vary from 5.5" to 9" depending
on
> the wheel
> and the diameter- 15" and 16", I don't think they were made in 14" but
I
> could be wrong.
>
> Taka
>
> On 10/9/06, JordanVw at aol.com <JordanVw at aol.com> wrote:
> >
> > i know the Audi fuchs alloys are 45mm offset, 5x112 bolt
pattern...but
> how
> > wide are they?   6"??  or 6.5"???
> >
> > also, does anyone know the 5 lug bolt pattern for Porsche Fuchs or
> cookie cutter wheels?   is it 5x110?
> > chris

_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro
---
Watch this space for ads :)