Control Arm questions-'00 VW Passat 4Motion

[Grant Lenahan]

My experience says replce them one at a time as they go. It seems kinda
ramdom. My experience comes from an 00s4.
Ealier cars I'd say do all the bushings at once. They were cheap and the
rubber replaceable. Not so the new ones.

Grant
----- Original Message ----- 
From: "Chris Semple" <chris at force5auto.com>
To: <quattro at audifans.com>
Sent: Thursday, September 14, 2006 9:33 AM
Subject: RE: Control Arm questions-'00 VW Passat 4Motion


>
>
> -----Original Message-----
> From: quattro-bounces at audifans.com
> [mailto:quattro-bounces at audifans.com]On Behalf Of Steve Meyer
>
> When replacing the control arms, what else should be
> done? Tie rods? Bushings?
> Thanks boys and girls!
> Steve
>
> If you bought the front end kit(8D0-498-998, 495$) it would have the front
> swaybar links and tie rod ends included. I'd do those before sending a car
> out for a 95$ alignment.
>
> -Cheers
> Chris Semple
> Concord NH
> '84 4000q
>    '93 E350 Club
>       '04 Golf TDi
>
>
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
> ---
> Watch this space for ads :)
>