the "0" on the flywheel

[SJ]

From: "Kneale Brownson" <kneale at coslink.net>
To: "SJ" <syljay at optonline.net>; <quattro at audifans.com>
Subject: Re: Re: the "0" on the flywheel


> The problem with using the vibration damper as a marking point is that
it's
> subject to change.  The outer rim is separated from the part attached to
> the crankshaft by the rubber.  So SJ's tricks only apply to one-time
usage,
> not as a reference for the future.

**** Thats correct. One time usage to verify the facts.
Chances are very good that this experimental determination of TDC will line
up with the Flywheel TDC reference mark,  confirming that all is well.

SJ



-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.12.3/447 - Release Date: 9/13/2006