3M Marine Adhesive Sealant 5200

[Ado Sigal]

With whatever adhesive one uses, it is important to reinforce the bond 
by inserting a plastic or metal tube. I used plastic one from ball point 
pen that fits very well.

HTH,

Ado


L DC wrote:

>Does anyone know if this adhesive, 3M Marine Sealant
>5200, would work on a broken nipple from the locking
>diff plastic servo?
>
>As I wiggled the tranny to detach it from the engine
>block on my '85 QSW for a clutch job, one of the
>nipples on the plastic servo broke off.
>
>I glued it with an adhesive that supposedly works even
>on metal/plastic that comes in contact with either
>gasoline or oil.
>
>Anyway I re-installed the tranny and when I took a
>good look at everything to make sure it was in order,
>I discovered that the nipple had come apart once again
>where it had been glued.
>
>So much for that adhesive!!!  
>
>I believe Cody is having the same issue and had
>inquired about a good adhesive to glue a broken servo
>nipple.
>
>-Regards,
>
>-Louis
>
>
>
>  
>