Moving the fuse box on an '82 CGT

[Huw Powell]

> I hope a question on a CGT is not too "off topic". I will have my dash  board 
> out for conversion and was wondering if there was a wiring  diagram/schematic 
> for moving the fuse box out under the hood? I have an '83 CGT  parts car. 

Hahahahahaha.

OK, I might have actually created one, once upon a time...

I'd recommend having both Bentleys on hand.  The wire colors, luckily, 
are consistent.  Some circuits vary slightly.  You'll basically have to 
cut and splice all the wires on the car to the plugs that fit the new 
fusebox - unless you swap out entire harnesses (not a bad idea, but 
requires more stripping of the car).

I have this useless file on my web site:

http://www.humanspeakers.com/audi/fusebox.htm

and a diagram of the inside circuitry of the new style fusebox:

http://www.humanspeakers.com/cgi-bin/audi_img.pl?image=images/fusebox.gif

hope this helps a little...

-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/