A6 CV joint

[Richard J Lebens]

Except that those 6 triple square bolts aren't supposed to be reused (I assume that is why they come in the boot kit).
 
The axle bolt method is very simple and the tool rolled into the garage along with the car.  I don't have a bolt that is threaded all the way and it worked fine(1991 90 20V).  

----- Original Message ----
From: Tihol Tiholov <t.tiholov at gmail.com>
To: quattro at audifans.com
Sent: Friday, April 20, 2007 11:32:33 AM
Subject: Re: A6 CV joint


If the boot needs replacement, what about pulling the axle off the car (6
small bolts), on the bench taking off the inner CV joint (much easier than
the outer, at least on Typ 44) and swapping the new boot in from there?
Maybe even installing 2 new boots - inner and outer?  If the outer CV needs
swapping, it should come off relatively easy with the usual persuader.

Otherwise the array of bolts and adaptations boggles my mind
_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro
---
Watch this space for ads :)

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com