[urq] Megaquirt V2.2 5 cyl configuration

[Ingo Rautenberg]

Ben,

Have you checked on Motorgeek.com?  There's a bunch of 034efi and a  
few Megasquirt guys there as well.

Ingo

On Apr 25, 2007, at 10:11 AM, Ben Swann wrote:

> I'm getting ready to fire my new engine up - using Megasquirt V.22  
> and MAC-14
> for ignition (should be same config. As MAC-11).
>
>
>
> Does anyone have some basic configuration files or screens I can  
> compare with
> mine.  I'm using Megatune 2.25 (trying to use  MSquirt and Spark  
> Extra for
> MAPdot code, but won't communicate with the V2.2 unit - I suspect  
> the 9V
> battery used for the Stimulator is too low.)  Megatune works fine  
> to get my
> initial setup correct.
>
>
>
> I was looking for some samples on line, but not finding much.   
> Mainly I need
> to verify injections per. Engine cycle - is it 1 or 5?  It is a  
> single window
> hall sensor, but pulse being generated by the ECU and should be 5  
> pulses - 1
> per cyl.
>
>
>
> I'm using 37 lb injector, high impedance.  Engine is MC-1 with NF  
> big valve
> head.Fuel Pressure set at 45PSI.
>
>
>
> TIA for quick replies.
>
>
>
> Ben
>
>
>
>
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/ 
> listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ...  
> all contributions welcome!