Is the B3 Radiator Repairable?

[Kneale Brownson]

I epoxied a piece of copper pipe in place of the plastic top radiator hose spout that broke off my 200q20v's radiator after I laid on top of it to get to the steering rack end of the high pressure hose.  It held up from fall until the following summer, when I replaced all the cooling system.  I soldered a piece of wire onto the pipe to create a raised lip.
   
  See:  http://www.pbase.com/kneale_brownson/image/71383807

"John S. Lagnese" <jlagnese at massed.net> wrote:
  Time to give Chris @ Force 5 a call. I had a similar problem with my 91 
Jetta. It never held, no matter what I used or did.
John
----- Original Message ----- 
From: "Chris Talley" 
To: 
Sent: Sunday, August 05, 2007 7:20 PM
Subject: Is the B3 Radiator Repairable?


> Hello,
>
> Is the B3 Radiator Repairable? I Was flushing the coolant system and broke
> off the plastic spout? on the front off the upper plastic cap that comes
> from the auxiullary radiator.