Removing and Replacing Turbo...one bolt!
Kurt Deschler
desch at alum.wpi.edu
Mon Aug 6 16:02:30 EDT 2007
You can also heat up the end of a box end wrench and bend it approx 30
degrees to get in there.
-Kurt
> Message: 1
> Date: Sun, 5 Aug 2007 12:19:30 -0400
> From: "Ben Swann" <benswann at comcast.net>
> Subject: Removing and Replacing Turbo...one bolt!
> To: <dbpulvino at hotmail.com>
> Cc: quattro at audifans.com, 200q20v at audifans.com
> Message-ID: <044f01c7d77c$6732af80$6501a8c0 at swansong>
> Content-Type: text/plain; charset="us-ascii"
>
> Crows foot and extension.
>
>
>
> [
>
> Date: Sat, 4 Aug 2007 14:33:05 -0700
>
> From: Derek Pulvino < >
>
> Subject: Removing and Replacing Turbo...one bolt!
>
> To: 200q20V mailing list <200q20v at audifans.com>
>
> Message-ID: <BAY119-DAV1462722C69FAD6C72369B6BEEB0 at phx.gbl>
>
> Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
>
>
>
> I asked a while ago if anybody had hints for removing and replacing
>
> the turbo and was told there is one bolt that's difficult. Well I've
>
> dug in and I'm now down to one bolt. It's the bolt located, as
>
> viewed facing the engine from the passenger side, on the upper left
>
> hand side of the flange attaching the turbo to the exhaust manifold.
>
> Was able to get a 15mm open end wrench on it but couldn't get enough
>
> force to budge the bolt...and I think the bolt is situated in a
>
> manner that has the outside of the wrench hitting against the
>
> surrounding flange when I try to turn it. I'm taking a quick
>
> breather to think on this, but in the meantime, any tool
>
> recommendations to get at this thing? Couldn't get a socket or the
>
> closed end of an end wrench on the bolt.
>
>
>
> Oh, and once I get all the bolts off I think I'm going to have hard
>
> time removing the turbo. I've got studs that coming out of turbo
>
> into the downpipe, and from the manifold into the turbo. Seems like
>
> that's going to make removal a touch dicey given the 90-degree offset
>
> on which these bolts protrude at. Thoughts on this?
>
>
>
> Derek P
>
More information about the quattro
mailing list