Sensor Pins for camshaft triggered ignition

[Huw Powell]

> I'm trying to locate a source for pins that can be use for magnetic pickup
> triggered ignition (or other).
> 
> These would be steel pins that can be threaded or bolted onto a cam sprocket
> or crank pulley. 
> 
> Anyone here know?

Just winging it here, but what you describe sounds like a (small) bolt 
with the head cut off.  Drill and tap a matching hole, and use loctite 
to insure it (them?) staying in place.

Or, if a press fit is what you want, a small piece of steel rod cut to 
an approriate length.

-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/