Sensor Pins for camshaft triggered ignition

[thejimrose]

right on. 034 doesn't sell anything for this?

On 1/8/07, Ben Swann <benswann at comcast.net> wrote:
>
>  Thanks - Right idea, but too big.  I need pins that are only about 2cm
> long if that and about 5mm dia.
>
>
>
> Also, $85 would be a bit much for 5 pins.
>
>
>  ------------------------------
>
> *From:* thejimrose [mailto:thejimrose at gmail.com]
> *Sent:* Monday, January 08, 2007 3:57 PM
> *To:* benswann at comcast.net; quattro at audifans.com
> *Subject:* re: Sensor Pins for camshaft triggered ignition
>
>
>
> hey ben - i'm not sure if these would work but the b5 a4 front brake
> caliper uses a high grade steel [i think it's stainless] pin for the slider
> mechanism. one end is threaded, the other hex [allen] and threads into the..
> carrier iirc? cant' visualize w/out looking at it. anyway it's a threaded
> pin about 2" long.
>
> might work for that app? scroll down to the 'brake stiffening kit' here
> for an idea:
> http://www.tyrolsport.com/audiperformance.htm
>
> >>>I'm trying to locate a source for pins that can be use for magnetic
> pickup
> triggered ignition(or other).
>
> These would be steel pins that can be threaded or bolted onto a cam
> sprocket
> or crank pulley.
>



-- 
--------------------------------------------------------
Chuck Norris counted to infinity. Twice.