Sensor Pins for camshaft triggered ignition

[Ben Swann]

Well - did not see it there, but thought so.

 

  _____  

From: thejimrose [mailto:thejimrose at gmail.com] 
Sent: Monday, January 08, 2007 4:56 PM
To: Ben Swann
Cc: quattro at audifans.com
Subject: Re: Sensor Pins for camshaft triggered ignition

 

right on. 034 doesn't sell anything for this? 

On 1/8/07, Ben Swann <benswann at comcast.net> wrote: 

Thanks - Right idea, but too big.  I need pins that are only about 2cm long if
that and about 5mm dia. 

 

Also, $85 would be a bit much for 5 pins.

 

  _____  

From: thejimrose [mailto:thejimrose at gmail.com] 
Sent: Monday, January 08, 2007 3:57 PM
To: benswann at comcast.net; quattro at audifans.com
Subject: re: Sensor Pins for camshaft triggered ignition

 

hey ben - i'm not sure if these would work but the b5 a4 front brake caliper
uses a high grade steel [i think it's stainless] pin for the slider mechanism.
one end is threaded, the other hex [allen] and threads into the.. carrier
iirc? cant' visualize w/out looking at it. anyway it's a threaded pin about 2"
long. 

might work for that app? scroll down to the 'brake stiffening kit' here for an
idea:
http://www.tyrolsport.com/audiperformance.htm

>>>I'm trying to locate a source for pins that can be use for magnetic pickup
triggered ignition(or other).

These would be steel pins that can be threaded or bolted onto a cam sprocket
or crank pulley. 




-- 
--------------------------------------------------------
Chuck Norris counted to infinity. Twice.