dashboard successfully fixed

[Snoopy]

Some time ago I was complaining about beeping autocheck. It tried to
convince me that one of the bulbs are out, however, all of them were
fine. I also had flaky temp readings, which sometimes got better after
hitting the dashboard on the top left side :) Last weekend I pulled
the dashboard out, and checked the connectors. Bingo, 2 cold solder
joints exactly on temperature and bulb warning pins. A few touches
with soldering gun, and everything went to normal. If anyone wonders
how the cold joints look, check
http://www.tangible-technology.com/articles/joint_update.html.



Snoopy
Audi 100 Avant '90