URQ Brake lights

[dgraber460 at aol.com]

That is the piece of the puzzle I was missing. My cruise control had stopped working some time ago as well. That means my dangling wire indeed goes to pin F20.
This list ROCKS!!


Dennis
Denver


-----Original Message-----
From: Huw Powell <audi at humanspeakers.com>
To: dgraber460 at aol.com
Cc: erwendell at mac.com; quattro at audifans.com
Sent: Tue, 24 Jul 2007 12:46 pm
Subject: Re: URQ Brake lights


> FWIW, my pedal switch has 12v (red with black trace) at one pole?
> which seems to agree with Mr Bentley.?
?
Ah yes, of course, you guys are right. I dug out my cruise diagram,?
which shows the way the cc system is connected to the "hot" side of the?
brake lights, after the brake light switch.?
?
>> This assumes that Huw is correct and the load (bulbs) are between?
>> the supply and the switch and not the more normal case where the?
>> load is between the switch and ground.?
?
-- Huw Powell?
?
http://www.humanspeakers.com/audi?
?
http://www.humanthoughts.org/?


________________________________________________________________________
AOL now offers free email to everyone.  Find out more about what's free from AOL at AOL.com.