Brake upgrade questions

[LL - NY]

If you can swap the G60 calipers on the existing 5000tq G54 caliper
brackets,
that should work, however the rotors have hats that are for the S4's 35mm
offset,
and you 5000 has a 45mm offset, so those won't work. From what I recall,
your
original rotors, however do work. As for 16"s, no need, the G60's will fit
under
factory 15"s. To be absolutely certain of the wheel fit, check out Scott
Mockry's
website www.sjmautotechnik.com as there are certain Ronal R8 fitments that
are a tight fit with the brakes (BTDT on my 200), but most of the other
factory
5 x 112 B.C. 15"s are easy fits.

LL - NY

On 3/24/07, cody at 5000tq.com <cody at 5000tq.com> wrote:
>
> Ok so I'm preparing to install a BIRA system 3 on an urS4. I was
> wondering about fitment of the urS's old schtuff onto a 5ktq.
> Possible? Easy? Worth it?
>
> I'm not in a position to spend the kind of money needed to do a proper
> brake upgrade, but since the old urS4 caliper brackets, calipers,
> rotors, et al would be either free or close to it my little lightbulb
> lit up. I'm sure I'd need 16" wheels... I could work on that, maybe
> beg/borrow/steal a set I know of laying arround ;-).
>
> -Cody Forbes
> http://www.5000tq.com
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
> ---
> Watch this space for ads :)
>