[urq] Ignition switch?

[Martin Pajak]

Dennis,

There is a spot that you have to drill to release the ignition switch.
Do you have Bentley?  There is a pic with measurements on where to drill the
hole and how big it needs to be.

If you don't I can scan my Bentley and email you the page.

Let me know.

Cheers
Martin Pajak

http://www.quattro.ca

1982 Audi Ur-quattro (50,000 mi) SQ project
1984 Audi 80 quattro (145,000 km) 2-door!!
1984 Audi 4000s quattro (131,000 mi) new toy :)
1987 Audi 4000s quattro (212,000 km) wintervagen mit 7A :)
 
 
-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
Of DGraber460 at aol.com
Sent: Saturday, March 24, 2007 5:22 PM
To: urq at audifans.com
Cc: quattro at audifans.com
Subject: [urq] Ignition switch?

I am truing to replace my ignition switch on the early build 83 URQ, and
not 
having much luck.
I have the entire steering column on the bench and there is no access to
the 
retaining screw. It is all TOTALLY encapsulated in cast aluminum.
I have done this on my later build car and don't remember this at  all.
Any BTDT appreciated. 
 
Dennis
Denver



************************************** AOL now offers free email to
everyone. 
 Find out more about what's free from AOL at http://www.aol.com.
_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!