Audi 4000 Rally Mod - need your advice

[Vittorio Bares]

There's a spherical bearing in the hard mount.

I've posted pics on motorgeek
http://www.motorgeek.com/phpBB2/viewtopic.php?t=15095

That might help?

-----Original Message-----
From: Huw Powell [mailto:audi at humanspeakers.com] 
Sent: Friday, March 30, 2007 2:22 PM
To: Vittorio Bares
Cc: quattro at audifans.com
Subject: Re: Audi 4000 Rally Mod - need your advice


> [VB] Agreed, the idea is to eliminate the castle nut and the rubber
> top mount. Use the nut that originally clamps the top hat to the
> strut mount to clamp the new hard mount to the spring plate. Then
> bolt the hard mount from the bottom to the new strut tower plate.

That sounds like the top of the strut will be bolted solidly in place?
Or am I wrong?  How will it move when it has to?  It has to be able to
rotate to steer, and alter its vertical "angle" a bit under cornering,
etc.

> You probably need a picture

Yes, probably... at least in order to offer anything resembling
"intelligent" comments!

-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/