[urq] Seat heater element for urQ/Coupe

[Tony Hoffman]

Louis-Alain,

As for the height adjustment, I've added it to a Rabbit, but the
spacing between the rails is different. What we did is pulled the
bottom from a second gen Scirocco on the passenger side and used it on
the passenger side of the Rabbit. However, the height adjustment is
also on the inside of those cars. Another option would be to use the
power mechanism from a 16V Jetta. I'm sure you could retrofit it to a
4000 adjustable seat, then you could put the switch wherever you want.

Tony Hoffman


On 3/30/07, Louis-Alain Richard <laraa at sympatico.ca> wrote:
> Thanks Tony, Scott and Brandon.
>
> So, if I resume, I need to do the job next fall in front of a NFL game, with
> some beer, not too much, and my buns will be warm for as long as the car
> will last ?
>
> Now, I guess the element that will be shot will be the bottom one, no ? But
> if ETKA is right, it is the same for both bottom and seat back.
>
> Two more questions : is the right seat swappable to the driver side, for the
> time I work on it ?
> And, is it possible to install the height adjusting mechanism from the Coupe
> driver seat on the urQ passenger seat ?
>
> Thanks again, folks
>
> Louis-Alain