automotive "syringe"?

[Max Wellhouse]

I've had good luck buying the Monoject syringes at Farm supply 
houses.  depending on the viscosity of the butyl, it might work with 
a #16 needle.  I shoot catalyzed epoxy with this set up every once in a whille.

Good luck

DM&FS

At 06:50 PM 5/20/2007, Brett Dikeman wrote:


>On May 20, 2007, at 11:48 AM, Jason Kohls wrote:
>
> > I'm going to try to seal up my windshield leak with some Butyl sealant
> > but the applicator is too thick to reach.  I was looking around for a
> > syringe at craft stores, the box stores, etc. but I can't find
> > anything.
>
>Try the pet stores.  Ask for a plastic feeding syringe.  This is
>basically what they look like:
>http://www.calvetsupply.com/ProductImages/35ccfeeding.jpg
>
>Not sure if the tip will be fine enough for you.  Aside from that,
>you might want to try McMaster; look for oiling syringes.
>
>Brett
>_______________________________________________
>quattro mailing list
>quattro at audifans.com
>http://www.audifans.com/mailman/listinfo/quattro
>---
>Watch this space for ads :)