fuel pump wiring question

[McCohens at aol.com]

Putting an 034 IB in my 80 TQ, current issue is wiring the pump.  The  034 
uses ground to switch.  I would like to use the stock wiring and  relay.  Found 
a wire in the old ignition computer harness that turns the  pump on with +12.  
I was planning to hook that wire to a switched +12 fuse  panel just 
installed.  Now I need to find which ground wire goes to the  stock pump relay and hook 
it to the 034 harness.  Can anyone lend more info  than the bentley book?  It 
says a brown wire with a green stripe at  connector T5.  I could really use a 
little more guidance before I start  cutting wires at the fuse box.
 
TIA
Randy



************************************** See what's new at http://www.aol.com