EFI + MAC-14 maxing ataround 5k RPM

[Huw Powell]

> Things that can be automatically ruled out:
> Fuel pump relay – this does not apply, as I am providing continuous power to the fuel
> pump with a direct feed of #10 wire direct to the pump - relayed of course, but always
> on with ignition.  Once I get engine tuned, I’ll enable cutout relay circuit – that can
> actually be done through MS.

Are you *certain* that the FPR is not powering *anything*?  because your 
symptoms are the classic 4 cylinder FPR in 5 cyl car 5200 rpm cutout.

Just suggesting you triple check... like, does the car run with the fpr 
removed?

-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/