200 TQ 20V tranny

[John S. Lagnese]

Ok, good news! Its a 91 200 20V Avant. So, this should work?
----- Original Message ----- 
From: "Tony Hoffman" <auditony at gmail.com>
To: "John S. Lagnese" <jlagnese at massed.net>
Cc: <quattro at audifans.com>
Sent: Monday, April 14, 2008 3:27 PM
Subject: Re: 200 TQ 20V tranny


> The 10VT adn 20VT transmissions are different. If your car is a 10VT,
> you can use the trans from any 10VT car, including the 5000TQ. The
> final drive ratio is 3.89 for these cars. The 20VT (91 0nly) has a
> 4.11 final drive.
>
> HTH,
> Tony Hoffman
>
> On Sun, Apr 13, 2008 at 9:04 PM, John S. Lagnese <jlagnese at massed.net> 
> wrote:
>> Hi,
>> Is there any other tranmission applications for this car? Will just the 
>> 89
>> to 91 TQ units fit? There is an  91Avant 20V transmission. Is it the 
>> same?
>> Thanks,
>> John
>>