wheels are off
Kneale Brownson
knealeski at sbcglobal.net
Sat Aug 30 14:00:46 PDT 2008
I hope you wirebrushed the corrosion off the hub and applied a little antiseize before installing the wheels????
Kent McLean <kentmclean at comcast.net> wrote: About a month ago I decided to put the old 16-inch wheels from my A4
on the '91 200. The fronts went on, barely clearing the UFO rotors.
I figured I was home free.
The rear wheels... I could not remove. They were frozen onto the
hubs. Once or twice a week for the past month I'd spray the joint
with PB Blaster. Kick, kick, kick. Raise the rear up on the jack,
drop it on the wheel. Today, I finally heard a bit of hollow echo
while kicking. More PB Blaster, more kicking, up on the jack,
drop it (with no lugs), and FINALLY I got one side free. Yes!
The other side succumbed a little easier.
"Let the tool do the work."
So my '91 200 now has A4 wheels.
--
Kent McLean
'99 A4 Avant, w/ quattro, V6, Tiptronic, :)
'91 200 TQA #1, backup car
'94 100 S Avant, "Moody", now with a new owner
'91 200 TQA #2, up in smoke 2
'89 200 TQ, "Bad Puppy", up in smoke
_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro
---
Watch this space for ads :)
More information about the quattro
mailing list