No spark

[Dave Yentema]

try checking for fault codes if you can

Possible suspects include crank position sensor, RPM sensor, hall sender
----- Original Message ----- 
From: "John Lagnese" <jlagnese at massed.net>
To: "'200q20v'" <a200q20v at gmail.com>; <>
Sent: Thursday, December 11, 2008 3:24 PM
Subject: No spark


> Hi,
> 
> My 91 200 TQ 20V with about 140K has no spark. My kid was driving it and
> he said it just stalled and wouldn't restart. He had it towed back. It
> started once, went to 1500 rpm and died.
> 
> I changed the cap and rotor with new Bosch parts, and replaced the plugs
> with Autolite double platinum. (What I had been using.) 
> 
> Still no start, so I checked and found no spark from the coil wire. The
> coil checked out to Bentley spec. There was also 12V to the coil.
> 
> What would be some other likely suspects?
> 
> John
> 
> I just had the timing belt changed within 1000 miles.
> 
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
> ---
> Watch this space for ads :)