Throwing in the towel

[Max Hoepli]

Make sure to keep firm pressure on the Philips screw driver so as not round
out the screw head, only need to turn ~ 3 times, enough to pull of assembly,
will be wires plugged in clusters on the back. \

Max

-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com] On
Behalf Of frank j. bauer
Sent: January 23, 2008 20:41
To: Rick Cone
Cc: quattro at audifans.com
Subject: Re: Throwing in the towel

i don't have the bentley handy so here's the best i can remember:
there is an elliptical hole on the bottom of the steering column.
put a long phillips #2 screwdriver in there with the tip pointing up and 
to the left at an angle.
this screw should loosen a collar and allow you to slide the subassembly 
off.
hope i got it right...

frank

Rick Cone wrote:
> Okay, I'm trying to change the ignition switch on my 200 turbo quattro.
How to you get the tumbler out of the steering column?  I got the switch
loose from the column, but I can't seem to get it out.  I need to drill out
two pins so I can replace the electrical part of the switch.
> 
> Thanks,
> Rick


-- 
No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.516 / Virus Database: 269.19.9/1239 - Release Date: 1/23/2008
10:24 AM

_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro
---
Watch this space for ads :)