Wanted - Timing belt tools 2079 and 2084

[Tony Hoffman]

I built a locking tool, and it does not require removing the front
end. Also, I use a socket (24 or 27mm) with a 24" breaker bar to get
the center bolt out. Just did one the other day on an NF 1990 Audi
100, no problems. I do remove the front end, however, simply to make
cleaning and seal replacement easier.

On the flip side, my tool required a welder to make, and I realize not
everyone has access to one.

Tony Hoffman

On Sat, Mar 22, 2008 at 5:52 PM, syljay <syljay at optonline.net> wrote:
> Anybody got these tools (2079 and 2084)to sell?
> Special Tool 2079 - crank pulley bolt torque tool
> Special Tool 2084 - crank pulley positioning tool
>
> Pix of tools:
> http://www.sjmautotechnik.com/tools/auditools.html
>
> I need to replace my leaking water pump . .. and do the timing belt
> change while I'm at it.
>
> I need the proper tools to lock the crank and unbolt the crank bolt.
>
> I've read the jury-rigged tooling write-ups in the archives. Most of
> the crank locking gizmos require the front end off the car to gain
> proper access.
>
> Anybody got a set of these tools (2079 and 2084)that they want to get
> rid of(sell)?
>
> SJ in NJ